 Processor
: |
Intel Pentium III / VIA Socket
370 Processor |
| Chipset
: |
VIA82C686B, VT860A, Realtek
RTL8139C, ALI M5113 super I/O, VT1611A audio chip, salt IC9000A/D
|
| System
Memory / RAM : |
One DIMM socket, One SO-DIM,
support up to 1GB of SDRAM |
| VGA
connector : |
One DB-15 VGA connector
|
| LCD
connector : |
One LCD 2 x 25 x 2.0 mm box-header
and one molex 5045-05A inverter connector (GND, 5V, 12V, ENABKL, BLK_CONT)
|
| Sound
connector : |
Built-in sound functions,
include Mic-in, Line-in, Speaker-out, BLK_VR external connectors, one CD-in,
1 x 4 x 2.54 mm pin-header (R, GND, GND, L) and one Speaker-out Molex 5045-4A
connector with 3W output |
| Ethernet
Connector : |
One RJ-45 connector, support
10/100 Base-T interface,wake on LAN, Boot ROM and PXE functions |
| SSD
interface : |
Reserved socket for DiskOnChip
from M-System, support up to 144 MB flash memory disk |
| Expansion
Bus : |
Built-in one PISA expansion
slot |
| IDE
Interface : |
One 2 x 22 x 2.0 mm PCI IDE
port, support up to two IDE devices. Supports PIO mode 4 and Bus Master.
Also supports Multi-word DMA and Ultra DMA/33/66/100 |
| Floppy
Drive Interface : |
One 2 x 17 x 2.54 mm FDD port
(support up to two floppy devices) or one 1 x 26 x 1.0 mm FDD port (support
one floppy device) |
| Serial
Port : |
Four COM ports with ESD protect,
COM1 RS-232 DB-9 connector, COM2 RS-232 DB-9 connector, COM3 RS-232/422/485
DB-9 connector, (RS-485 Auto sensing), and COM4 for touch controller
|
| Parallel
Port : |
One multi-mode parallel port
( SPP/EPP/ECP ) DB-25 connector |
| Universal
Serial Bus : |
Support two USB port connector |
| IR
Interface : |
Supports one IrDA header |
| Digital
I/O : |
Digital-in*4 and digital-out*4(2x5x2.54mm
Header) |
| Watchdog
Timer : |
Software 16 level time-out
intervals (0/2/4/6/8/10/12/14/16/18/20/22/24/26/28/30 sec.) |
| Touch
Connector : |
8 pin molex
connector |
|
Keyboard/Mouse
Connector : |
Tow 6-pin
mini-DIM PS/2 Keyboard and mouse connector |
| BIOS
: |
256KB Award
licence BIOS, Support boot-up from USB type external CD-ROM, HDD and FDD
devices |
| RTC
: |
Internal RTC with Li battery |
| Power
management : |
I/O peripheral devices support
power saving and doze/standby/suspend modes. APM 1.2 compliant. |
| Power
Connector : |
On-board power connector,
with one ATX/AT co-design power connector optional and one HDD 4T connector
|
| Operating
Temperature : |
0°C - 60°C |
| Dimensions
: |
219 x 159 mm +/- 0.5mm |
| EMI/EMS
: |
Meet CE and FCC class B regulation,
test service not include in design and layout charge |
| Humidity
: |
5% - 95 %
RH, non-condensing |
| Other
function : |
Support USB
device boot up (FDD, HDD, CD-ROM) Supportb Dual VGA Alarm power on |
Click to enlarge image
Model Number
Related Keywords:
Bookmark / Share this page